[−][src]Struct stm32l4x6::rcc::pllcfgr::R
Value read from the register
Methods
impl R
[src]
impl R
pub fn bits(&self) -> u32
[src]
pub fn bits(&self) -> u32
Value of the register as raw bits
pub fn pllr(&self) -> PLLRR
[src]
pub fn pllr(&self) -> PLLRR
Bits 25:26 - Main PLL division factor for PLLCLK (system clock)
pub fn pllren(&self) -> PLLRENR
[src]
pub fn pllren(&self) -> PLLRENR
Bit 24 - Main PLL PLLCLK output enable
pub fn pllq(&self) -> PLLQR
[src]
pub fn pllq(&self) -> PLLQR
Bits 21:22 - Main PLL division factor for PLLUSB1CLK(48 MHz clock)
pub fn pllqen(&self) -> PLLQENR
[src]
pub fn pllqen(&self) -> PLLQENR
Bit 20 - Main PLL PLLUSB1CLK output enable
pub fn pllp(&self) -> PLLPR
[src]
pub fn pllp(&self) -> PLLPR
Bit 17 - Main PLL division factor for PLLSAI3CLK (SAI1 and SAI2 clock)
pub fn pllpen(&self) -> PLLPENR
[src]
pub fn pllpen(&self) -> PLLPENR
Bit 16 - Main PLL PLLSAI3CLK output enable
pub fn plln(&self) -> PLLNR
[src]
pub fn plln(&self) -> PLLNR
Bits 8:14 - Main PLL multiplication factor for VCO
pub fn pllm(&self) -> PLLMR
[src]
pub fn pllm(&self) -> PLLMR
Bits 4:6 - Division factor for the main PLL and audio PLL (PLLSAI1 and PLLSAI2) input clock
pub fn pllsrc(&self) -> PLLSRCR
[src]
pub fn pllsrc(&self) -> PLLSRCR
Bits 0:1 - Main PLL, PLLSAI1 and PLLSAI2 entry clock source
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more