[−][src]Struct stm32l4x6::rcc::cr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn pllsai2on(&mut self) -> _PLLSAI2ONW
[src]
pub fn pllsai2on(&mut self) -> _PLLSAI2ONW
Bit 28 - SAI2 PLL enable
pub fn pllsai1on(&mut self) -> _PLLSAI1ONW
[src]
pub fn pllsai1on(&mut self) -> _PLLSAI1ONW
Bit 26 - SAI1 PLL enable
pub fn pllon(&mut self) -> _PLLONW
[src]
pub fn pllon(&mut self) -> _PLLONW
Bit 24 - Main PLL enable
pub fn csson(&mut self) -> _CSSONW
[src]
pub fn csson(&mut self) -> _CSSONW
Bit 19 - Clock security system enable
pub fn hsebyp(&mut self) -> _HSEBYPW
[src]
pub fn hsebyp(&mut self) -> _HSEBYPW
Bit 18 - HSE crystal oscillator bypass
pub fn hseon(&mut self) -> _HSEONW
[src]
pub fn hseon(&mut self) -> _HSEONW
Bit 16 - HSE clock enable
pub fn hsiasfs(&mut self) -> _HSIASFSW
[src]
pub fn hsiasfs(&mut self) -> _HSIASFSW
Bit 11 - HSI automatic start from Stop
pub fn hsikeron(&mut self) -> _HSIKERONW
[src]
pub fn hsikeron(&mut self) -> _HSIKERONW
Bit 9 - HSI always enable for peripheral kernels
pub fn hsion(&mut self) -> _HSIONW
[src]
pub fn hsion(&mut self) -> _HSIONW
Bit 8 - HSI clock enable
pub fn msirange(&mut self) -> _MSIRANGEW
[src]
pub fn msirange(&mut self) -> _MSIRANGEW
Bits 4:7 - MSI clock ranges
pub fn msirgsel(&mut self) -> _MSIRGSELW
[src]
pub fn msirgsel(&mut self) -> _MSIRGSELW
Bit 3 - MSI clock range selection
pub fn msipllen(&mut self) -> _MSIPLLENW
[src]
pub fn msipllen(&mut self) -> _MSIPLLENW
Bit 2 - MSI clock PLL enable
pub fn msion(&mut self) -> _MSIONW
[src]
pub fn msion(&mut self) -> _MSIONW
Bit 0 - MSI clock enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more