[−][src]Struct stm32l4x6::rcc::apb2enr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn dfsdmen(&mut self) -> _DFSDMENW
[src]
pub fn dfsdmen(&mut self) -> _DFSDMENW
Bit 24 - DFSDM timer clock enable
pub fn sai2en(&mut self) -> _SAI2ENW
[src]
pub fn sai2en(&mut self) -> _SAI2ENW
Bit 22 - SAI2 clock enable
pub fn sai1en(&mut self) -> _SAI1ENW
[src]
pub fn sai1en(&mut self) -> _SAI1ENW
Bit 21 - SAI1 clock enable
pub fn tim17en(&mut self) -> _TIM17ENW
[src]
pub fn tim17en(&mut self) -> _TIM17ENW
Bit 18 - TIM17 timer clock enable
pub fn tim16en(&mut self) -> _TIM16ENW
[src]
pub fn tim16en(&mut self) -> _TIM16ENW
Bit 17 - TIM16 timer clock enable
pub fn tim15en(&mut self) -> _TIM15ENW
[src]
pub fn tim15en(&mut self) -> _TIM15ENW
Bit 16 - TIM15 timer clock enable
pub fn usart1en(&mut self) -> _USART1ENW
[src]
pub fn usart1en(&mut self) -> _USART1ENW
Bit 14 - USART1clock enable
pub fn tim8en(&mut self) -> _TIM8ENW
[src]
pub fn tim8en(&mut self) -> _TIM8ENW
Bit 13 - TIM8 timer clock enable
pub fn spi1en(&mut self) -> _SPI1ENW
[src]
pub fn spi1en(&mut self) -> _SPI1ENW
Bit 12 - SPI1 clock enable
pub fn tim1en(&mut self) -> _TIM1ENW
[src]
pub fn tim1en(&mut self) -> _TIM1ENW
Bit 11 - TIM1 timer clock enable
pub fn sdmmcen(&mut self) -> _SDMMCENW
[src]
pub fn sdmmcen(&mut self) -> _SDMMCENW
Bit 10 - SDMMC clock enable
pub fn firewallen(&mut self) -> _FIREWALLENW
[src]
pub fn firewallen(&mut self) -> _FIREWALLENW
Bit 7 - Firewall clock enable
pub fn syscfgen(&mut self) -> _SYSCFGENW
[src]
pub fn syscfgen(&mut self) -> _SYSCFGENW
Bit 0 - SYSCFG clock enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more