[−][src]Struct stm32l4x6::rcc::ahb2enr::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn rngen(&mut self) -> _RNGENW
[src]
pub fn rngen(&mut self) -> _RNGENW
Bit 18 - Random Number Generator clock enable
pub fn aesen(&mut self) -> _AESENW
[src]
pub fn aesen(&mut self) -> _AESENW
Bit 16 - AES accelerator clock enable
pub fn adcen(&mut self) -> _ADCENW
[src]
pub fn adcen(&mut self) -> _ADCENW
Bit 13 - ADC clock enable
pub fn otgfsen(&mut self) -> _OTGFSENW
[src]
pub fn otgfsen(&mut self) -> _OTGFSENW
Bit 12 - OTG full speed clock enable
pub fn gpiohen(&mut self) -> _GPIOHENW
[src]
pub fn gpiohen(&mut self) -> _GPIOHENW
Bit 7 - IO port H clock enable
pub fn gpiogen(&mut self) -> _GPIOGENW
[src]
pub fn gpiogen(&mut self) -> _GPIOGENW
Bit 6 - IO port G clock enable
pub fn gpiofen(&mut self) -> _GPIOFENW
[src]
pub fn gpiofen(&mut self) -> _GPIOFENW
Bit 5 - IO port F clock enable
pub fn gpioeen(&mut self) -> _GPIOEENW
[src]
pub fn gpioeen(&mut self) -> _GPIOEENW
Bit 4 - IO port E clock enable
pub fn gpioden(&mut self) -> _GPIODENW
[src]
pub fn gpioden(&mut self) -> _GPIODENW
Bit 3 - IO port D clock enable
pub fn gpiocen(&mut self) -> _GPIOCENW
[src]
pub fn gpiocen(&mut self) -> _GPIOCENW
Bit 2 - IO port C clock enable
pub fn gpioben(&mut self) -> _GPIOBENW
[src]
pub fn gpioben(&mut self) -> _GPIOBENW
Bit 1 - IO port B clock enable
pub fn gpioaen(&mut self) -> _GPIOAENW
[src]
pub fn gpioaen(&mut self) -> _GPIOAENW
Bit 0 - IO port A clock enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more