[−][src]Struct stm32l4x6::usart1::cr3::R
Value read from the register
Methods
impl R
[src]
impl R
pub fn bits(&self) -> u32
[src]
pub fn bits(&self) -> u32
Value of the register as raw bits
pub fn wufie(&self) -> WUFIER
[src]
pub fn wufie(&self) -> WUFIER
Bit 22 - Wakeup from Stop mode interrupt enable
pub fn wus(&self) -> WUSR
[src]
pub fn wus(&self) -> WUSR
Bits 20:21 - Wakeup from Stop mode interrupt flag selection
pub fn scarcnt(&self) -> SCARCNTR
[src]
pub fn scarcnt(&self) -> SCARCNTR
Bits 17:19 - Smartcard auto-retry count
pub fn dep(&self) -> DEPR
[src]
pub fn dep(&self) -> DEPR
Bit 15 - Driver enable polarity selection
pub fn dem(&self) -> DEMR
[src]
pub fn dem(&self) -> DEMR
Bit 14 - Driver enable mode
pub fn ddre(&self) -> DDRER
[src]
pub fn ddre(&self) -> DDRER
Bit 13 - DMA Disable on Reception Error
pub fn ovrdis(&self) -> OVRDISR
[src]
pub fn ovrdis(&self) -> OVRDISR
Bit 12 - Overrun Disable
pub fn onebit(&self) -> ONEBITR
[src]
pub fn onebit(&self) -> ONEBITR
Bit 11 - One sample bit method enable
pub fn ctsie(&self) -> CTSIER
[src]
pub fn ctsie(&self) -> CTSIER
Bit 10 - CTS interrupt enable
pub fn ctse(&self) -> CTSER
[src]
pub fn ctse(&self) -> CTSER
Bit 9 - CTS enable
pub fn rtse(&self) -> RTSER
[src]
pub fn rtse(&self) -> RTSER
Bit 8 - RTS enable
pub fn dmat(&self) -> DMATR
[src]
pub fn dmat(&self) -> DMATR
Bit 7 - DMA enable transmitter
pub fn dmar(&self) -> DMARR
[src]
pub fn dmar(&self) -> DMARR
Bit 6 - DMA enable receiver
pub fn scen(&self) -> SCENR
[src]
pub fn scen(&self) -> SCENR
Bit 5 - Smartcard mode enable
pub fn nack(&self) -> NACKR
[src]
pub fn nack(&self) -> NACKR
Bit 4 - Smartcard NACK enable
pub fn hdsel(&self) -> HDSELR
[src]
pub fn hdsel(&self) -> HDSELR
Bit 3 - Half-duplex selection
pub fn irlp(&self) -> IRLPR
[src]
pub fn irlp(&self) -> IRLPR
Bit 2 - Ir low-power
pub fn iren(&self) -> IRENR
[src]
pub fn iren(&self) -> IRENR
Bit 1 - Ir mode enable
pub fn eie(&self) -> EIER
[src]
pub fn eie(&self) -> EIER
Bit 0 - Error interrupt enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more