[−][src]Struct stm32l4x6::sai1::bcr1::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn mcjdiv(&mut self) -> _MCJDIVW
[src]
pub fn mcjdiv(&mut self) -> _MCJDIVW
Bits 20:23 - Master clock divider
pub fn nodiv(&mut self) -> _NODIVW
[src]
pub fn nodiv(&mut self) -> _NODIVW
Bit 19 - No divider
pub fn dmaen(&mut self) -> _DMAENW
[src]
pub fn dmaen(&mut self) -> _DMAENW
Bit 17 - DMA enable
pub fn saiben(&mut self) -> _SAIBENW
[src]
pub fn saiben(&mut self) -> _SAIBENW
Bit 16 - Audio block B enable
pub fn out_dri(&mut self) -> _OUTDRIW
[src]
pub fn out_dri(&mut self) -> _OUTDRIW
Bit 13 - Output drive
pub fn mono(&mut self) -> _MONOW
[src]
pub fn mono(&mut self) -> _MONOW
Bit 12 - Mono mode
pub fn syncen(&mut self) -> _SYNCENW
[src]
pub fn syncen(&mut self) -> _SYNCENW
Bits 10:11 - Synchronization enable
pub fn ckstr(&mut self) -> _CKSTRW
[src]
pub fn ckstr(&mut self) -> _CKSTRW
Bit 9 - Clock strobing edge
pub fn lsbfirst(&mut self) -> _LSBFIRSTW
[src]
pub fn lsbfirst(&mut self) -> _LSBFIRSTW
Bit 8 - Least significant bit first
pub fn ds(&mut self) -> _DSW
[src]
pub fn ds(&mut self) -> _DSW
Bits 5:7 - Data size
pub fn prtcfg(&mut self) -> _PRTCFGW
[src]
pub fn prtcfg(&mut self) -> _PRTCFGW
Bits 2:3 - Protocol configuration
pub fn mode(&mut self) -> _MODEW
[src]
pub fn mode(&mut self) -> _MODEW
Bits 0:1 - Audio block mode
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
🔬 This is a nightly-only experimental API. (
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
🔬 This is a nightly-only experimental API. (
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
🔬 This is a nightly-only experimental API. (
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more