[−][src]Struct stm32l4x6::otg_fs_global::fs_gintsts::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn mmis(&mut self) -> _MMISW
[src]
pub fn mmis(&mut self) -> _MMISW
Bit 1 - Mode mismatch interrupt
pub fn sof(&mut self) -> _SOFW
[src]
pub fn sof(&mut self) -> _SOFW
Bit 3 - Start of frame
pub fn esusp(&mut self) -> _ESUSPW
[src]
pub fn esusp(&mut self) -> _ESUSPW
Bit 10 - Early suspend
pub fn usbsusp(&mut self) -> _USBSUSPW
[src]
pub fn usbsusp(&mut self) -> _USBSUSPW
Bit 11 - USB suspend
pub fn usbrst(&mut self) -> _USBRSTW
[src]
pub fn usbrst(&mut self) -> _USBRSTW
Bit 12 - USB reset
pub fn enumdne(&mut self) -> _ENUMDNEW
[src]
pub fn enumdne(&mut self) -> _ENUMDNEW
Bit 13 - Enumeration done
pub fn isoodrp(&mut self) -> _ISOODRPW
[src]
pub fn isoodrp(&mut self) -> _ISOODRPW
Bit 14 - Isochronous OUT packet dropped interrupt
pub fn eopf(&mut self) -> _EOPFW
[src]
pub fn eopf(&mut self) -> _EOPFW
Bit 15 - End of periodic frame interrupt
pub fn iisoixfr(&mut self) -> _IISOIXFRW
[src]
pub fn iisoixfr(&mut self) -> _IISOIXFRW
Bit 20 - Incomplete isochronous IN transfer
pub fn ipxfr_incompisoout(&mut self) -> _IPXFR_INCOMPISOOUTW
[src]
pub fn ipxfr_incompisoout(&mut self) -> _IPXFR_INCOMPISOOUTW
Bit 21 - Incomplete periodic transfer(Host mode)/Incomplete isochronous OUT transfer(Device mode)
pub fn cidschg(&mut self) -> _CIDSCHGW
[src]
pub fn cidschg(&mut self) -> _CIDSCHGW
Bit 28 - Connector ID status change
pub fn discint(&mut self) -> _DISCINTW
[src]
pub fn discint(&mut self) -> _DISCINTW
Bit 29 - Disconnect detected interrupt
pub fn srqint(&mut self) -> _SRQINTW
[src]
pub fn srqint(&mut self) -> _SRQINTW
Bit 30 - Session request/new session detected interrupt
pub fn wkupint(&mut self) -> _WKUPINTW
[src]
pub fn wkupint(&mut self) -> _WKUPINTW
Bit 31 - Resume/remote wakeup detected interrupt
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more