[−][src]Struct stm32l4x6::dfsdm::dfsdm2_cr2::W
Value to write to the register
Methods
impl W
[src]
impl W
pub fn reset_value() -> W
[src]
pub fn reset_value() -> W
Reset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self
Writes raw bits to the register
pub fn awdch(&mut self) -> _AWDCHW
[src]
pub fn awdch(&mut self) -> _AWDCHW
Bits 16:23 - Analog watchdog channel selection
pub fn exch(&mut self) -> _EXCHW
[src]
pub fn exch(&mut self) -> _EXCHW
Bits 8:15 - Extremes detector channel selection
pub fn ckabie(&mut self) -> _CKABIEW
[src]
pub fn ckabie(&mut self) -> _CKABIEW
Bit 6 - Clock absence interrupt enable
pub fn scdie(&mut self) -> _SCDIEW
[src]
pub fn scdie(&mut self) -> _SCDIEW
Bit 5 - Short-circuit detector interrupt enable
pub fn awdie(&mut self) -> _AWDIEW
[src]
pub fn awdie(&mut self) -> _AWDIEW
Bit 4 - Analog watchdog interrupt enable
pub fn rovrie(&mut self) -> _ROVRIEW
[src]
pub fn rovrie(&mut self) -> _ROVRIEW
Bit 3 - Regular data overrun interrupt enable
pub fn jovrie(&mut self) -> _JOVRIEW
[src]
pub fn jovrie(&mut self) -> _JOVRIEW
Bit 2 - Injected data overrun interrupt enable
pub fn reocie(&mut self) -> _REOCIEW
[src]
pub fn reocie(&mut self) -> _REOCIEW
Bit 1 - Regular end of conversion interrupt enable
pub fn jeocie(&mut self) -> _JEOCIEW
[src]
pub fn jeocie(&mut self) -> _JEOCIEW
Bit 0 - Injected end of conversion interrupt enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>,
[src]
impl<T, U> TryFrom for T where
T: From<U>,
type Error = !
try_from
)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>
try_from
)Performs the conversion.
impl<T> From for T
[src]
impl<T> From for T
impl<T, U> TryInto for T where
U: TryFrom<T>,
[src]
impl<T, U> TryInto for T where
U: TryFrom<T>,
type Error = <U as TryFrom<T>>::Error
try_from
)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>
try_from
)Performs the conversion.
impl<T, U> Into for T where
U: From<T>,
[src]
impl<T, U> Into for T where
U: From<T>,
impl<T> Borrow for T where
T: ?Sized,
[src]
impl<T> Borrow for T where
T: ?Sized,
impl<T> BorrowMut for T where
T: ?Sized,
[src]
impl<T> BorrowMut for T where
T: ?Sized,
fn borrow_mut(&mut self) -> &mut T
[src]
fn borrow_mut(&mut self) -> &mut T
Mutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized,
[src]
impl<T> Any for T where
T: 'static + ?Sized,
fn get_type_id(&self) -> TypeId
[src]
fn get_type_id(&self) -> TypeId
🔬 This is a nightly-only experimental API. (get_type_id
)
this method will likely be replaced by an associated static
Gets the TypeId
of self
. Read more