[−][src]Struct stm32l4x6::dfsdm::dfsdm2_cr1::W
Value to write to the register
Methods
impl W[src]
impl Wpub fn reset_value() -> W[src]
pub fn reset_value() -> WReset value of the register
pub unsafe fn bits(&mut self, bits: u32) -> &mut Self[src]
pub unsafe fn bits(&mut self, bits: u32) -> &mut SelfWrites raw bits to the register
pub fn awfsel(&mut self) -> _AWFSELW[src]
pub fn awfsel(&mut self) -> _AWFSELWBit 30 - Analog watchdog fast mode select
pub fn fast(&mut self) -> _FASTW[src]
pub fn fast(&mut self) -> _FASTWBit 29 - Fast conversion mode selection for regular conversions
pub fn rch(&mut self) -> _RCHW[src]
pub fn rch(&mut self) -> _RCHWBits 24:26 - Regular channel selection
pub fn rdmaen(&mut self) -> _RDMAENW[src]
pub fn rdmaen(&mut self) -> _RDMAENWBit 21 - DMA channel enabled to read data for the regular conversion
pub fn rsync(&mut self) -> _RSYNCW[src]
pub fn rsync(&mut self) -> _RSYNCWBit 19 - Launch regular conversion synchronously with DFSDM0
pub fn rcont(&mut self) -> _RCONTW[src]
pub fn rcont(&mut self) -> _RCONTWBit 18 - Continuous mode selection for regular conversions
pub fn rswstart(&mut self) -> _RSWSTARTW[src]
pub fn rswstart(&mut self) -> _RSWSTARTWBit 17 - Software start of a conversion on the regular channel
pub fn jexten(&mut self) -> _JEXTENW[src]
pub fn jexten(&mut self) -> _JEXTENWBits 13:14 - Trigger enable and trigger edge selection for injected conversions
pub fn jextsel(&mut self) -> _JEXTSELW[src]
pub fn jextsel(&mut self) -> _JEXTSELWBits 8:10 - Trigger signal selection for launching injected conversions
pub fn jdmaen(&mut self) -> _JDMAENW[src]
pub fn jdmaen(&mut self) -> _JDMAENWBit 5 - DMA channel enabled to read data for the injected channel group
pub fn jscan(&mut self) -> _JSCANW[src]
pub fn jscan(&mut self) -> _JSCANWBit 4 - Scanning conversion mode for injected conversions
pub fn jsync(&mut self) -> _JSYNCW[src]
pub fn jsync(&mut self) -> _JSYNCWBit 3 - Launch an injected conversion synchronously with the DFSDM0 JSWSTART trigger
pub fn jswstart(&mut self) -> _JSWSTARTW[src]
pub fn jswstart(&mut self) -> _JSWSTARTWBit 1 - Start a conversion of the injected group of channels
pub fn dfen(&mut self) -> _DFENW[src]
pub fn dfen(&mut self) -> _DFENWBit 0 - DFSDM enable
Auto Trait Implementations
Blanket Implementations
impl<T, U> TryFrom for T where
T: From<U>, [src]
impl<T, U> TryFrom for T where
T: From<U>, type Error = !
try_from)The type returned in the event of a conversion error.
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>[src]
fn try_from(value: U) -> Result<T, <T as TryFrom<U>>::Error>try_from)Performs the conversion.
impl<T> From for T[src]
impl<T> From for Timpl<T, U> TryInto for T where
U: TryFrom<T>, [src]
impl<T, U> TryInto for T where
U: TryFrom<T>, type Error = <U as TryFrom<T>>::Error
try_from)The type returned in the event of a conversion error.
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>[src]
fn try_into(self) -> Result<U, <U as TryFrom<T>>::Error>try_from)Performs the conversion.
impl<T, U> Into for T where
U: From<T>, [src]
impl<T, U> Into for T where
U: From<T>, impl<T> Borrow for T where
T: ?Sized, [src]
impl<T> Borrow for T where
T: ?Sized, impl<T> BorrowMut for T where
T: ?Sized, [src]
impl<T> BorrowMut for T where
T: ?Sized, fn borrow_mut(&mut self) -> &mut T[src]
fn borrow_mut(&mut self) -> &mut TMutably borrows from an owned value. Read more
impl<T> Any for T where
T: 'static + ?Sized, [src]
impl<T> Any for T where
T: 'static + ?Sized, fn get_type_id(&self) -> TypeId[src]
fn get_type_id(&self) -> TypeId🔬 This is a nightly-only experimental API. (get_type_id)
this method will likely be replaced by an associated static
Gets the TypeId of self. Read more